sheet_metal_straightening_machine RM Schwerlasthandling

Straighteners Series RM

Straightening Rolls Diameter 100 mm

 

Straighteners of series "RM" with straightening roll diameter 100 mm and closed straightening head are available pneumatically adjustable entry pinch rolls and 7, resp. 9 straightening rolls. The upper straightening rolls are single adjustable. 
 

Straighteners of series RM in standard version are available with

  • Straightening roll diameter 100 mm
  • Single adjustment of upper straightening rolls with indication of immersion depth
  • Pneumatically adjustable entry pinch rolls
  • Constant-speed drive 18 meters / minute
  • Loop control by supporting stand with switches for upper and lower limit
  • Rolls hardened and grinded, 58 + 1 HRC
  • Roughness of the rolls 0,2 micron
  • Max material widths of 500 mm, 600 mm, 700 mm, 800 mm, 1.000 mm,
    1.250 mm, 1.500 mm
  • Max material thicknesses of 4,6 - 2,5 mm, depending on material width and without
    support rolls


Example of rolls configuration of straighteners of series RM:

  • RM/9            2 entry pinch rolls + 7 straightening rolls
  • RM/11          2 entry pinch rolls + 9 straightening rolls

 

As options for these straighteners there are accessories available, like for example:

  • Control of the decoiler at the entry side by initiator
  • Variable speed drive controlled by frequency converter with loop control by 
    lever arm, powered with 3,0, 4,0, 5,5 and 7,5 kW
  • Loop control by ultrasonic sensor
  • Hydraulically operated material entrance table with 2, 4 or 6 moving functions
  • Loop bridge, up to 4 meter
  • Common base for straightener and decoiler

At the area on the right side you will find a list of standard straighteners out of the straightener series RM as described above, including the technical data of the single models. If you will not find there the suitable model or if you will have wishes deviating from the listed specifications, please do contact us.

Please inform us about your requirement regarding the straightener searched by you. Basin on the base machines listed on this page as well as optional accessories we will configurate your individual straightener. We are prepared to check and realise any further adaptation of the straightener which may be needed.

Please contact us by phone or email.

Tel.: 0049 2156 419193
Fax: 0049 2156 4979325
eMail: info@seidel-handlingsysteme.de

coil_transport_cart_with_carrying_bolt ground conveyors PTT3 universal_transport_carts_type_1 vehicle for coil transport with prism pallet_trucks Werkzeughandling big components turner Coilverarbeitung flatbed cart blank stack turning stations coil_transport_trucks_with_prism Coilverarbeitung pedestrian push pull units PTT3 with lifting hydraulics